Setting up Dnsmasq caching DNS server in Linux

Dnsmasq is an DNS server with an integrated DHCP, DNS, PXE and TFTP server. It’s extremely lightweight and easy on CPU and memory, perfect for constrained embedded systems.

Using dnsmasq significantly improves web browsing experience, much better than the browser’s inbuilt DNS cache. There are better DNS servers around, why dnsmasq ? It’s lightweight, easier to configure and I’m using it as TFTP and PXE server too.

1. Installing Dnsmasq

Dnsmasq is available as precompiled binary package for almost every Linux distro, for Debian and it’s derivatives like Ubuntu, Linux Mint, install dnsmasq with the following command.

 sudo apt-get install dnsmasq 

For Archlinux and it’s derevatives like Manjaro, Chakra Linux use this command.

 sudo pacman -S dnsmasq 

Create a new group dnsmasq , will be used later in the dnsmasq configuration file.

 sudo groupadd -r dnsmasq 

2. configuring dnsmasq as DNS server

Let’s edit the dnsmasq configuration file to use it as caching dns server, there is one main configuration file /etc/dnsmasq.conf , and it could also load many individual configuration files from the /etc/dnsmasq.d/ folder.

First backup the original dnsmasq.conf file and start editing the main configuration with your favorite text editor like nano, Gedit etc.

 sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf.bac 

 sudo nano /etc/dnsmasq.conf 

Note: Editing the configuration file requires root privilege.

Look at the dnsmasq example configuration I’m using in a Debian testing system.

# Interface, user and PID
#
listen-address=127.0.0.1
port=53
bind-interfaces
user=dnsmasq
group=dnsmasq
pid-file=/var/run/dnsmasq/dnsmasq.pid

# Additional configuration
#
no-poll
bogus-priv
neg-ttl=3600
cache-size=1000
dns-forward-max=150
domain-needed
resolv-file=/etc/resolv.personal
addn-hosts=/etc/hosts.adblock

You may directly copy-paste and save the above configuration, now I’m explaining a little what these configuration options mean.

• listen-address , use this IP as DNS server IP.
• port , bind this port to the above IP, 53 is the default DNS port.
• bind-interfaces , it forces dnsmasq to really bind only the interfaces it is listening on.
• user and group, dnsmasq daemon’s user and group.
• pid-file , path to the PID of dnsmasq.
• no-poll , don’t poll /etc/resolv.conf for changes.
• bogus-priv, bogus private reverse lookups.
• cache-size , max limit of cache size in memory.
• resolv-file , DNS resolver file used by dnsmasq to resolve from internet.
• addn-hosts , use a additional host file, very useful.

Note: It’s also possible to run dnsmasq as root user and group, but experts suggests not to do so.

The addn-hosts option is interesting, you could use a long list of domains pointing to localhot(127.0.0.1) to block malicious web advertisement.

Now create the /etc/resolv.personal file, which is used by dnsmasq to resolve unknown DNS requests from another upstream DNS server.

 sudo nano /etc/resolv.personal 

and put some nameserver there like bellow.

nameserver 103.25.56.238

nameserver 111.67.16.202

I’m using OpenNIC DNS servers above, they don’t keep any log and updated very fast.

Finally restart dnsmasq so new configuration could be loaded, restarting dnsmasq could be different for different linux distros, first try with the service command on Debian based systems.

 sudo service dnsmasq restart  

If it fails anyway, try again with systemctl command, the systemctl method is default in Archlinux and derevatives.

 sudo systemctl restart dnsmasq.service 

Now the dnsmasq caching dns server is running and listening for DNS quarries on port 53.

3. Using the dnsmasq cached DNS server

Configure your connection manager like Network Manager , Connman or Wicd to use 127.0.0.1 as DNS server. This step may be different, depend upon whic connection manager you are using.

For Network manager, edit your connection and set Method: to Automatic (DHCP) address only and set DNS servers: to 127.0.0.1 , exaple screenshot bellow.

Ubuntu, Linux mint or other Ubuntu based Linux distro may be already using another name server information handler like resolvconf , surely it will conflict with dnsmasq.

So if you are planning to use dnsmasq on ubuntu as caching dns server, better to stop resolvconf first, have a look on commands bellow.

 sudo service resolvconf stop 

 sudo update-rc.d resolvconf remove 

 
sudo rm -f /etc/resolv.conf
su -c "echo 'nameserver 127.0.0.1' > /etc/resolv.conf"

4. Testing the cached DNS server

To ensure your your system is using 127.0.0.1 (loopback address) as DNS server, look inside the /etc/resolv.conf file,

 cat /etc/resolv.conf 

It must contain a line nameserver 127.0.0.1 , You can check the time required to resolve a domain name with the following command

 time dig +short facebook.com 

First it may take some time, about 0.5-2 seconds, now run it again, the reply will be instant, just few miliseconds.

Flush dnsmasq DNS cache: If you ever need to flush DNS cache, just restart dnsmasq server and all cache will be flushed from memory.

 sudo service dnsmasq restart 

Dnsmasq is extensively found on OpenWrt, dd-wrt and other router firmwares, one of the most important software there. It’s also used by Network Manager as DHCP server to share internet connections. Dnsmasq DNS server also minimizes the risk of dns leak. Know more about the basics of dnsmasq in this wiki article.

So that’s it, how to configure dnsmasq dns server with caching support in a Linux system for super fast DNS lookup and more. If you have any suggestion or question just leave a comment, also don’t forget to share your thought on dnsmasq here.